Victron Lynx Smart BMS 1000 (M10) LYN034170210
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for the Victron Energy Smart Lithium batteries, and the Lynx Smart is the most feature rich and complete option.
Key Features
Features of the Lynx Smart BMS
Battery Management System
The Lynx Smart BMS is a dedicated Battery Management System for Victron Energy Lithium Smart Batteries. It contains a positive and a negative busbar, a BMS, a contactor and a battery monitor. It is part of the Lynx Distribution system. It can communicate via Bluetooth with the VictronConnect app and can communicate via VE.Can with an GX device.
The Lynx Smart BMS has a status LED and a Bluetooth LED.
VictronConnect app
The Lynx Smart BMS and up to 4 connected Lynx Distributors can be monitored and setup with the VictronConnect app. For more information see the VictronConnect app download page and the VictronConnect manual.
GX device
The Lynx Smart BMS and up to 4 connected Lynx Distributors can be monitored with a GX device. For more information on the GX device see the GX device product page.
The GX device can be connected to the VRM portal allowing for remote monitoring.
For more information on the VRM portal see the VRM page.
Lithium Smart Batteries
The Lynx Smart BMS is a dedicated BMS for the Victron Energy range of Lithium Smart batteries. These batteries are lithium iron phosphate (LiFePO4) batteries and are available in 12.8V or 25.6V and in a variety of capacities. They can be connected in series, parallel and series/parallel so a battery bank for system voltages of 12V, 24V or 48V can be created. Up to four 12.8V batteries or two 25.6V batteries can be connected in series.
Up to 5 batteries or battery series strings can be connected in parallel.
The Lynx Distribution System
The Lynx Distribution System consist of the following parts:
• Lynx Power In – A positive and negative busbar with 4 connections for batteries or DC equipment.
• Lynx Distributor – A positive and negative busbar with 4 fused connections for batteries or DC equipment together with fuse monitoring
• Lynx Shunt VE.Can – A positive busbar with a space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup with a GX device.
• Lynx Smart BMS – For use together with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contactor that is driven by a battery management system (BMS) and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect App and VE.Can communication for monitoring with a GX device and the VRM portal.
Specifications
|
ower |
Lynx Smart BMS 500A |
Lynx Smart BMS 1000A |
|---|---|---|
|
Supply voltage range |
9 – 60Vdc |
|
|
Supported system voltages |
12, 24 or 48V |
|
|
Reverse polarity protection |
No |
|
|
Main safety contactor continuous current rating |
500A continuous |
1000A continuous |
|
Main safety contactor peak current rating |
600A for 5 minutes |
1200A for 5 minutes |
|
Power consumption OFF mode |
0.3mA for all system voltages |
|
|
Power consumption in Standby mode |
Approximately 0.6W (50mA at 12V) |
|
|
Power consumption in ON mode |
Approximately 2.6W (217mA at 12V) depending on the state of the relays |
Approximately 4.2W (350mA at 12V) depending on the state of the relays |
|
Minimum load resistance for pre-charging |
10O and above for 12V systems 20O and above for 24V and 48V systems |
|
|
AUX output maximum current rating |
1.1A continuous, protected by resettable fuse |
|
|
Allow-to-charge port maximum current rating |
0.5A at 60Vdc, protected by resettable fuse |
|
|
Allow-to-discharge port maximum current rating |
0.5A at 60Vdc, protected by resettable fuse |
|
|
Programmable relay (SPDT) maximum current rating |
2A at 60Vdc |
|
Connections |
Lynx Smart BMS 500A |
Lynx Smart BMS 1000A |
|---|---|---|
|
Busbar |
M8 (Torque: 14 Nm) |
M10 (Torque: 33 Nm) (14Nm for units with a serial number before HQ2340XXXX) |
|
VE.Can |
RJ45 and RJ45 terminator |
|
|
I/O |
Removable multi-connector with screw terminals |
|
|
Battery BMS cables |
Male and female circular 3-pole connector with M8 screw ring Up to 20 batteries can be connected to the BMS by daisy chaining them |
|
|
Lynx Distributor (up to 4 modules) |
RJ10 (cable ships with each Lynx Distributor) |
|
Physical |
Lynx Smart BMS 500A |
Lynx Smart BMS 1000A |
|---|---|---|
|
Enclosure material |
ABS |
|
|
Enclosure dimensions (h x w x d) |
190 x 180 x 80mm |
230 x 180 x 100mm |
|
Unit weight |
1.9 kg |
2.7 kg |
|
Busbar material |
Tinned copper |
|
|
Busbar dimensions (h x w) |
8 x 30mm |
|
Environmental |
Lynx Smart BMS 500A |
Lynx Smart BMS 1000A |
|---|---|---|
|
Operating temperature range |
-40°C to +60° |
|
|
Storage temperature range |
-40°C to +60° |
|
|
Humidity |
Max. 95% (non-condensing) |
|
|
Protection class |
IP22 |
|
Standards |
Lynx Smart BMS 500A |
Lynx Smart BMS 1000A |
|---|---|---|
|
Safety |
EN-IEC 63000:2018 |
|
|
EMC |
EN-IEC 61000-6-3:2007/A1:2011/AC:2012 |
|
|
QMS |
NEN-EN-ISO 9001:2015 |
Internal Reference:
119014