Victron Lynx Smart BMS 1000 (M10) LYN034170210

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for the Victron Energy Smart Lithium batteries, and the Lynx Smart is the most feature rich and complete option. Key Features Features of the Lynx Smart BMS Battery Management System The Lynx Smart BMS is a dedicated Battery Management System for Victron Energy Lithium Smart Batteries. It contains a positive and a negative busbar, a BMS, a contactor and a battery monitor. It is part of the Lynx Distribution system. It can communicate via Bluetooth with the VictronConnect app and can communicate via VE.Can with an GX device. The Lynx Smart BMS has a status LED and a Bluetooth LED. VictronConnect app The Lynx Smart BMS and up to 4 connected Lynx Distributors can be monitored and setup with the VictronConnect app. For more information see the VictronConnect app download page and the VictronConnect manual. GX device The Lynx Smart BMS and up to 4 connected Lynx Distributors can be monitored with a GX device. For more information on the GX device see the GX device product page. The GX device can be connected to the VRM portal allowing for remote monitoring. For more information on the VRM portal see the VRM page. Lithium Smart Batteries The Lynx Smart BMS is a dedicated BMS for the Victron Energy range of Lithium Smart batteries. These batteries are lithium iron phosphate (LiFePO4) batteries and are available in 12.8V or 25.6V and in a variety of capacities. They can be connected in series, parallel and series/parallel so a battery bank for system voltages of 12V, 24V or 48V can be created. Up to four 12.8V batteries or two 25.6V batteries can be connected in series. Up to 5 batteries or battery series strings can be connected in parallel. The Lynx Distribution System The Lynx Distribution System consist of the following parts: • Lynx Power In – A positive and negative busbar with 4 connections for batteries or DC equipment. • Lynx Distributor – A positive and negative busbar with 4 fused connections for batteries or DC equipment together with fuse monitoring • Lynx Shunt VE.Can – A positive busbar with a space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup with a GX device. • Lynx Smart BMS – For use together with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contactor that is driven by a battery management system (BMS) and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect App and VE.Can communication for monitoring with a GX device and the VRM portal. Specifications ower Lynx Smart BMS 500A Lynx Smart BMS 1000A Supply voltage range 9 – 60Vdc Supported system voltages 12, 24 or 48V Reverse polarity protection No Main safety contactor continuous current rating 500A continuous 1000A continuous Main safety contactor peak current rating 600A for 5 minutes 1200A for 5 minutes Power consumption OFF mode 0.3mA for all system voltages Power consumption in Standby mode Approximately 0.6W (50mA at 12V) Power consumption in ON mode Approximately 2.6W (217mA at 12V) depending on the state of the relays Approximately 4.2W (350mA at 12V) depending on the state of the relays Minimum load resistance for pre-charging 10O and above for 12V systems 20O and above for 24V and 48V systems AUX output maximum current rating 1.1A continuous, protected by resettable fuse Allow-to-charge port maximum current rating 0.5A at 60Vdc, protected by resettable fuse Allow-to-discharge port maximum current rating 0.5A at 60Vdc, protected by resettable fuse Programmable relay (SPDT) maximum current rating 2A at 60Vdc Connections Lynx Smart BMS 500A Lynx Smart BMS 1000A Busbar M8 (Torque: 14 Nm) M10 (Torque: 33 Nm) (14Nm for units with a serial number before HQ2340XXXX) VE.Can RJ45 and RJ45 terminator I/O Removable multi-connector with screw terminals Battery BMS cables Male and female circular 3-pole connector with M8 screw ring Up to 20 batteries can be connected to the BMS by daisy chaining them Lynx Distributor (up to 4 modules) RJ10 (cable ships with each Lynx Distributor) Physical Lynx Smart BMS 500A Lynx Smart BMS 1000A Enclosure material ABS Enclosure dimensions (h x w x d) 190 x 180 x 80mm 230 x 180 x 100mm Unit weight 1.9 kg 2.7 kg Busbar material Tinned copper Busbar dimensions (h x w) 8 x 30mm Environmental Lynx Smart BMS 500A Lynx Smart BMS 1000A Operating temperature range -40°C to +60° Storage temperature range -40°C to +60° Humidity Max. 95% (non-condensing) Protection class IP22 Standards Lynx Smart BMS 500A Lynx Smart BMS 1000A Safety EN-IEC 63000:2018 EMC EN-IEC 61000-6-3:2007/A1:2011/AC:2012 QMS NEN-EN-ISO 9001:2015