Victron Victron Energy EV Charging station NS - Blue - EVC200300200

Victron Energy EV Charging station NS - Blue The EV Charging Station NS has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.  The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN. The charger can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM. Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system. It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.   Important Notice: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product. If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270. At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you. Thank you for choosing Batteries and Solar for your purchase.   Key Features High power EV Charging StationThe EV Charging Station NS has three-phase and single-phase capabilities. It delivers a maximum of 22 kW AC in three-phase or 7.3kW in single-phase mode. It comes with a blue front. A black or white front can be purchased separately. WiFi CommunicationWiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Stationmode for both, the initial setup and monitoring. Easy operation and control via Bluetooth and the VictronConnect AppGet full control and overview of all operating parameters and session statistics at a glance. Light Ring for fast viewing the device stateFully programmable RGB Light Ring around the charging port to quickly determine the device state. It can be programmed from theintegrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.). Three working modes available:1. Manual Mode to configure output currentManual mode allows configurable output current between 6-32 A. The charging power can be regulated in differentways: by using the web interface, from a GX device and VRM and via VictronConnect. It allows to manually start orstop the charging process when a vehicle is connected to the charging station. 2. Automatic Mode to ensure maximum PV system efficiencyDetects when excess power is available and uses only that power to charge the vehicle.3. Scheduled Mode to charge the EV at certain time intervalsA fully programmable scheduler allows charging at different time intervals, for example at certain times during thenight when grid energy is cheaper. Integration with GX devices and VRMControl and monitor the EV Charging Station NS from a GX device touch display and the Remote Console and the VRM Portal. TheVRM Portal also offers real time and custom reports for configurable time periods Specifications EV Charging Station NS EVC200300200 Input Voltage Range (V AC) 170 €“ 265 VAC Rated Charge Current 32 A / phase Nominal Power 22 kW Current Output Range 6 €“ 32 A WiFi Standards 802.11 b/g/n (2.4 GHz only) Self-consumption 15 mA @ 230 V Configurable Max. Current 10-32 A Configurable Min. Current 6 A up to 1 A below max. value Connector Type IEC 62196 Type 2 Means to Disconnect External circuit breaker (40 A recommended) Configurable Price/kWh Calculator (Eur) Default setting: 0.13 (adjustable) Control Type Web page, GX Device over Modbus TCP, VictronConnect via Bluetooth Light Ring 55 light configurable light effects available Protection External RCD is required Operating Temperature -25 °C to +50 °C Storage Temperature -40 °C to +80 °C Humidity 95%, non-condensing Data Communication Modbus TCP over WiFi, Bluetooth Enclosure Color Light Blue (RAL 5012), Traffic Black (RAL 9017), Traffic White (RAL 9016) Power Terminals 6-10 mm² / AWG 10-8 Protection Category IP44 Ventilation Not required Weight 3 kg Dimensions (H x W x D) 372 x 292 x 122 mm Standards (Safety) IEC 61851-1, IEC 61851-22 Detection Features Relay Contact Welded, Missing Protective Conductor, Missing Ground, Shorted C Attachments Datasheet