Hubi Retro 4 - SHV004

​Hubi Retro 4 Hubi Retro uses state of the art LED filament bulbs to provide a bright warm light, perfect for relaxation after dark in a summer house, conservatory, glamping yurt, shepherd's hut or garden office. Option 4 comes with a 10w solar panel, table lamp with 80 lumen vintage bulb, two floor lamps and ceiling light both with 350 lumen vintage bulbs. Hubi Retro uses state of the art LED filament bulbs to provide a bright warm light, perfect for relaxation after dark in a summer house, conservatory, glamping yurt, shepherd's hut or garden office. Hubi Retro 3 comes with a 10w solar panel, table lamp with 80 lumen vintage bulb, floor lamp and ceiling light both with 350 lumen vintage bulbs Hubi Retro system can be used €œnaked€ or a shade fitted to each of the lamp holders. With the ability to also power small devices such as mobile phones, tablets and 12v TVs, the Hubi Retro is the complete power solution. The wide range of accessories allows you to expand your kit as you wish. Hubi Retro is powered by a highly efficient solar cell that feeds the Hubi lithium battery pack, which in turn provides the power for our filament LEDs and other devices. Completely plug and play, the Hubi Retro needs no special equipment or electrical skills to install. Simply connect all the parts together using the connectors supplied and you will be up and running in less than one hour. With our 2 year global warranty and excellent after sales service plus a range of additional accessories, you can be sure that Hubi Retro will meet your needs. Contents 1 x 10k hub 1 x 10w solar panel and connection cable (expandable) 1 x solar panel wall bracket and fixings 1 x 3m hub to LED connection cable 1 x table lamp (no shade) and 80Lumen LED E14 filament type bulb 2 x floor lamps (no shade) and 350 lumen LED E27 filament type bulbs 1 x hub Y split cable 1 x instruction sheet Two year warranty Please note: Lampshades shown in some photos are not supplied with the Hubi Retro 4 kits Technical Specifications Hub  10k Voltage 12v Battery 10A custom lithium pack (replaceable) Useable watts at 12v/5v 96wh/230wh Power sockets 2x12v lighting sockets / 2xUSB sockets / 1x12v auto plug socket Switch settings System on/off - lighting on/off Max current 2.5A Overload protection Yes - reset and tool supplied Max solar input 60w/12v Expandable Yes (maximum of three 10k hubs can be linked) IP 54 - (can be used in damp and misty environments but must be kept away from direct contact with rain/water) Charge time Flat to full - 10 to 11 hours* Dimensions  220 x 146 x 50mm Weight  4.5Kg Lighting 0.8w / 12v LED (80 lumen) filament Type bulb - E14 fitting and 3.5w / 12v LED (350 lumen) filament type bulb €“ E27 fitting Solar panel 10w/12AH - see STP010 for more information   Specifications for Hubi Retro 4