Victron Phoenix Inverter 24/375 230V VE.Direct UK PIN241371400

The Phoenix 24/375 VE.Direct inverter allows power to domestic equipment €“ requiring 230V €“ using €˜leisure€™ or €˜automotive€™ batteries rated at 12V, 24V or 48V DC. Fitted with a UK Plug Voltage: 14V Cont. Output Power at 25°C: 375VA Peak Power: 700W Output AC Voltage: 230V Protection Category: IP21 Efficiency: 99% Bluetooth Enabled: No Plug Type: UK Dimensions: 86 x 165 x 260mm Weight: 3Kg Warranty: 5 Years Data Sheet Data Sheet The Phoenix 24/375 VE.Direct inverter allows power to domestic equipment €“ requiring 230V €“ using €˜leisure€™ or €˜automotive€™ batteries rated at 12V, 24V or 48V DC. This unit has the IEC plug. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook€™s and other devices (VE.Direct Bluetooth Smart dongle needed)  Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 €“ 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter24/375 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the Phoenix Inverter24/375 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Monitor, operate & control the system VictronConnect gives live status information and allows configuration of the Phoenix Inverter 12/375 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle. Use the REC040010210R controller for the Phoenix Inverter VE.Directs.