Changeover Switch Gas Regulator 30mBar ( for 2 Pigtails ) - 136.2026

Changeover Switch Gas Regulator 30mBar (for 2 Pigtails)  Changeover switch with regulator for use with red vapour tanks, alu bottles and LPGSHOP composite refillable cylinders. It is two stage regulator for better pressure stability, mandatory for mobile units. Second stage ensures that gas is evenly evaporated and no liquid gas is let into the system.  The connectors on inlet side are M20 1.5 parallel thread, also know as W20 - it is caravaning standard. The outlet is 8mm copper pipe compression fitting. Outlet pressure is 30mBar which is suitable for most appliances designed for motorhomes. It comes with a bracket to secure regulator to bulkhead. Inlet should be positioned upwards and higher than outlet of the bottle   The automatic changeover ensures continuous gas flow, automatically changing the gas withdrawal from the empty €œservice€ cylinder to the full €œreserve€ one. The full-empty indicator incorporated into the bonnet of the automatic changeover indicates the exhaustion status of the €œservice€ cylinder. The indicator color changes from green to red, when the €œservice€ cylinder is exhausted. The rotation of the automatic changeover handle to the full €œreserve€ cylinder restores the green color on the indicator. Start up - Turn two cylinders€™ gas valves on at the same time. This is fundamental, which ensures the automatic changeover the ability to continuously supply the gas appliance, in case the service cylinder becomes empty. The automatic changeover cannot turn to the reserve gas bottle if its valve is closed. Reading the automatic changeover€™s indicator: when the service gas bottle is full - When the two gas cylinders are full, the automatic changeover€™s indicator turns to green while opening gas valves A and B. - The arrow on the automatic changeover€™s knob indicates which one of the two gas cylinders is supplying gas: that is to say the €œservice gas bottle€. The other cylinder is the €œreserve gas bottle€. Reading the automatic changeover€™s indicator: when the service gas bottle is empty - When the service bottle is getting exhausted and reaches pressure values of inversion (lower than 10 PSIG), the automatic changeover turns automatically to the €œreserve gas bottle€ and the gas appliance continues working. In this case the automatic changeover€™s indicator turns to red: the end user gets to know that the €œservice gas bottle€ is empty: it is not supplying gas any more. Substituting the empty gas bottle Close the valve of the service gas bottle A and turn the automatic changeover€™s knob 180° (see figure 3 a). If the reserve gas bottle is full and its valve is open, the automatic changeover€™s indicator turns to green (figure 3 b).  Remove the empty gas bottle (figure 3c). Position a new full gas bottle. Open the gas valve A (figure 3d).   Comes with two long 75cm pigtails to use with Alu, GAS IT, Gaslow and GasBank cylinders.     Important Notice: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product. If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270. At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you. Thank you for choosing Batteries and Solar for your purchase. Key Features  Two-stage regulator for better pressure stability Suitable for red vapour tanks, alu bottles, and LPGSHOP composite refillable cylinders M20 1.5 parallel thread connectors (W20) on inlet side 8mm copper pipe compression fitting on outlet Outlet pressure of 30mBar Automatic changeover for continuous gas flow Full-empty indicator for service cylinder status   Specifications Inlet Connectors M20 1.5 parallel thread (W20) Outlet Connection 8mm copper pipe compression fitting Outlet Pressure 30mBar Stage Two-stage regulator Suitable Application Motorhomes, red vapour tanks, alu bottles, LPGSHOP composite refillable cylinders Changeover Feature Automatic changeover switch Full-Empty Indicator Yes, changes from green to red Bracket Included Yes Positioning Inlet should be positioned upwards and higher than the outlet of the bottle