100W Flexi Solar Panel White Rear Cable Exit STPVF100R

 100W Flexi Solar Panel White Rear Cable Exit PV Logic Flexi solar panels are the ultimate choice for flat or slightly curved surfaces. Benefit from the semi-flexible panel's self-healing top surface The ETFE top layer gives the PV Logic flexi extra resilience in really tough conditions. ETFE has a memory effect or self-healing capacity in the event the panel comes into contact with branches etc, thus ensuring any slight abrasions are €˜healed€™ within a few hours. The flexi range can even be walked on with soft deck shoes! During production the ETFE is dimpled to further protect the panel and provide an anti-slip surface, particularly useful if the panel is fitted to a boat deck. Important Notice: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product. If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270. At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you. Thank you for choosing Batteries and Solar for your purchase. Completely waterproof Each panel is assembled to ensure complete encapsulation. This ensures the six layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress. Cells protected from hot spots Where used on a camper van or boat, partial shading of a solar panel is typical. In these circumstances, heat build-up and damaging hot spots can occur leading to a significantly reduced life cycle of the panel. The larger 60w and above PV Logic flexi panels have up to two shading diodes housed within the fully waterproof junction box to prevent this occurrence. Superior design There are no square edges on a PV Logic flexi solar panel! Rounded panel corners and a unique curved junction box provide superior adhesion, no snag lamination and no sharp edges. The junction box is mechanically fixed in addition to being bonded to the panel. Strain relief is provided for the fitted 4m UV stabilised PV cable ensuring it cannot be accidentally pulled from the junction box. Underside cable exit (100w, 120w and 150w panels only)The cable of the 100w, 120w and 150w flexi panels exits the panel from the underside allowing for a completely flush fit to your roof or decking. A remote shading diode box is ensures consistent performance even in partially shady conditions. The 100w, 120w and 150w panels are available with a white back sheet or all black. Easy fixThe semi-flexible range can be bonded to flat or slight curved surfaces (3cm curve per metre) such as painted aluminium, metal, GRP and fibreglass using Simson ISR 70-03. Key Features High efficiency crystalline cell for €œall weather€ charging Water resistant, robust construction for outdoor use. In built diode protects against battery discharge Salt spray tested Tough and robust UV light tested 2 year product warranty Specifications Size 980x650x4mm Weight (kg) 3.75 *Watts per day (W) 600 *Amp hours per day (A) 36.84 Charge Controller 10Ah Pmax (WP) 150 Vmp (VDC) nominal voltage 17.6 Imp (A) 5.68 Voc (V) 21.9 Isc(A) short circuit current 6.14 IP (Ingress Protection) Rating IP69 *Watts and Amp hours/day based on six hours of average daily peak sunshine hours. Above specification at standard test conditions (STC) 1000w/m2, Cell Temp 25c. *Key Vmp - Nominal voltage Imp - Nominal current Isc - Short circuit current Watts and Amp hours/day based on six hours of average daily peak sunlight hours. Contents (panel kit) 1 x 100w semi-flexible solar panel - white rear exit1 x 10Ah charge controller (or upgrade to the 20Ah or 30Ah MPPT charge controller)1 x bonding agent1 x 4m cable (to connect from shading diode box to charge controller and battery)1 x 1m cable fixed to solar panel1 x shading diode box1 x fuse & holder4 x ring terminals1 x instruction sheet.

IMPORTANT NOTICE:

Please note that the images of the product shown above are for illustrative purposes only.

While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer.

We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product.

If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270.

At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you.

Thank you for choosing Batteries and Solar for your purchase.