Victron Cyrix-Li-charge Intelligent Charge Relay 12/24V-120A
The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay: €“ if the Charge Disconnect output of the VE.Bus BMS is high, and €“ if it senses 13,7V (resp. 27,4V or 54,8V) or more on its battery charger connection terminal, and €“ if it senses 2V or more on its battery terminal (the Cyrix will remain open, if not connect to the battery).
The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature.
In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay of 3 seconds. After two attempts to reengage with 3 seconds delay, the delay increases to 10 minutes.
Whenever battery voltage is less than 13,5V (resp. 27V or 54V), the Cyrix will disengage with a delay of 1 hour. Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5V. Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7V or more, the Cyrix will re-engage, with 3 seconds delay
IMPORTANT NOTICE:
Please note that the images of the product shown above are for illustrative purposes only.
While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer.
We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product.
If you have any questions or concerns, please feel free to contact our customer support team for further assistance at
support@batsol.co.uk or phone us at 01752 656270.
At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you.
Thank you for choosing Batteries and Solar for your purchase.
Key Features
Automatic Connection and Disconnection: Connects the battery charger with a 3-second delay under specific voltage conditions.
Control Input Monitoring: Disengages immediately upon detecting free floating control input, indicating overvoltage or overtemperature.
Overvoltage Alarm Handling: Resets after charging stops, attempting reconnection with a 3-second delay. After two unsuccessful attempts, the delay increases to 10 minutes.
Voltage-Based Disengagement: Disconnects if battery voltage drops below a certain threshold, with a 1-hour delay.
Smart Disengagement Control: Considers discharge current to prevent premature disconnection after charging ceases.
Specifications
| Brand |
Victron Energy
|
| Manufacturer Part Number |
CYR010120430
|
| Voltage |
12/24
|
| Continuous current & Breaking capacity at 12V or 24V |
120A
|
| Current Consumption When Open |
4 mA
|
| Protection Category |
IP54
|
| Dimensions |
H46 x W46 x D80mm
|
| Weight (kg) |
0.11
|
| Warranty |
5 Years
|
| Country of Manufacture |
Malaysia
|
