Victron Argodiode 80-2SC 2 batteries 80A Retail ARG080202000R

Argodiode 80-2SC 2 batteries 80A Retail  Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. It is fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. Installation should be conducted by a professional as simply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. Alternator energize input Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new €˜AC€™ diode isolators feature a special current limited energize input that will power the B+ when the engine run/stop switch is closed. Argo Diode Battery Isolator 80-2SC  Maximum charge current (A) 80 Maximum alternator current (A) 80 Number of batteries 2 Alternator Energize Input no Connection M6 Studs Compensation diode and Energize connection 6,3 mm Faston Weight kg (lbs) 0,5 (1.3) Dimensions h x w x d in mm 60 x 120 x 75 Victron Energy Part Number ARG080202000 (R) Important Notice: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product. If you have any questions or concerns, please feel free to contact our customer support team for further assistance at  support@batsol.co.uk or phone us at 01752 656270. At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you. Thank you for choosing Batteries and Solar for your purchase. Key Features Simultaneous Charging: Allows charging of two batteries from a single alternator, preventing battery interconnection. Prevents Discharge: Ensures that discharging one accessory battery doesn't lead to discharging the starter battery. Low Voltage Drop: Uses Schottky diodes for minimal voltage drop and efficient charging. Compensation Diode: Features a compensation diode to slightly enhance alternator output voltage. Special Energize Input: Incorporates a current-limited energize input for alternator powering. Professional Installation Recommended: To avoid reduced charge voltage and potential premature aging of batteries. Specifications Brand Victron Energy Manufacturer Part Number ARG080202000R Maximum Charge Current (A) 80 Maximum Alternator Current (A) 80 Number Of Batteries 2 Connection M6 Studs Compensation Diode & Energize Connection 6.3mm Faston Dimensions (mm) H60 x W120 x D75 Weight (kg) 0.5 Warranty 5 Years Country of Manufacture India   Attachments Data Sheet