Victron Automotive IP65 Charger 6V/12V-1.1A Retail BPC120180034R

Automotive IP65 Charger 6V/12V-1.1A Retail  Automotive IP65 Battery Charger 6V/12A €“ 1.1A with DC connector DC connector Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger. Charges 6V and 12V batteries The charger will automatically adapt its charge algorithm to 6V or 12V batteries Protected against overheating and reverse polarity connection The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection. Eight LED€™s for status and mode indication When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 2V in case of a 6V battery and 7V in case of a 12V battery), charging is initiated by pressing the MODE button. The state of charge of the battery is indicated by 4 LED€™s: Red LED marked 25% flashing: state of charge less than 25%.  Red LED marked 25% on, and red LED marked 50% flashing: state of charge less than 50%.  Red LED€™s on, and yellow LED marked 75% flashing: state of charge less than 75%.  Red and yellow LED€™s on and green LED marked 100% flashing: battery nearly charged.  - All charge level LED€™s solid on: battery fully charged. Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).  - In case of reverse polarity connection, the orange LED ! will turn on after pressing the MODE button. - If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted. - The charger always starts in STANDBY mode when connected to the AC supply. Important Notice: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product. If you have any questions or concerns, please feel free to contact our customer support team for further assistance at  support@batsol.co.uk or phone us at 01752 656270. At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you. Thank you for choosing Batteries and Solar for your purchase. Key Features Charges both 6V and 12V batteries Protection against overheating and reverse polarity Eight LEDs for status and mode indication Automatic charge algorithm adaptation Starts in STANDBY mode when connected to the AC supply Specifications Brand Victron Energy Manufacturer Part Number BPC120180034R Voltage 6/12