LED Strip Premium IP20 3014 18W/1m 1200LED 10MM Cool White 60K R-3014-1200-20-60K-2

Technical data for 0.5 m of strip: 120 LED, 9W, 900 lm, IP20Technical data for 1 m of strip: 240 LED, 18W,  1800 lm, IP20 The PREMIUM class is a completely new quality of LED strips. Designed for the most demanding customers, it is characterized by high quality workmanship of individual components and a solid PCB backing.Thanks to this, the tape will cope even in the most difficult working conditions. Modern diodes provide 100% more light than traditional tapes with the same power consumption.The tape roll length is 5m and the width is 10mm, and it's power is 9W/0,5 m (18W/m). One tape module has a length of 12,5mm and contains 3 modern LEDs type 3014.The tape can be cut every 12,5mm into sections of any length.Available in 3 light colors to choose from:€¢ warm white,€¢ neutral white,€¢ cool white.The presented LED strip has a luminous flux of  900 lm/0,5 m (1800 lm/m) and is suitable for commercial lighting.It can be used under kitchen cabinets or as lighting for desks and work stations. For comparison: a standard 5W/m LED strip emits a luminous flux of only 270 lm/m! Advantages of PREMIUM LED strips: Modern Premium SMD LEDs These are specially selected LEDs, characterized by a uniform light color along the entire length of the roll and very high luminous efficiency. As a result, we obtain an evenly dispersed glow of light with a uniform color. Premium class LEDs are a guarantee of full luminous efficiency throughout the entire lighting period declared by the manufacturer. They emit   twice as much light as standard LEDs with similar power consumption.       Thick PCB underlay and reinforced paths! Premium tapes have twice the thickness of the PCB base, on which the LEDs are arranged stably and precisely. As a result, they dissipate heat faster and more effectively, which significantly extends their service life. That's why these tapes can shine for so long! Thicker copper paths better distribute electrical voltage along the entire length of the roll, thanks to which the tape shines longer and does not heat up like standard LED strips. As a result, the Premium LEDs do not burn.     Good quality resistors! Appropriate resistors are of great importance for the life of the light source. In Premium tapes, the resistors have been selected so that the LEDs do not glow 100% of their capabilities! This solution allows the tape to shine the same for many years. Resistors of adequate capacity protect delicate LEDs against overload and damage. This is another important factor that improves the lighting quality of Premium tapes.   Choice of light color: The above infographic shows the actual photo of three connected sections of LED strip wrapped on a cylinder. Due to different technical parameters of monitors and color profiles in graphic card settings, please treat them as illustrative information, giving an approximate idea of the difference in color of lighting. Colors may vary depending on the surroundings and the color and structure of the illuminated surfaces. Product details Power supply 12V DC Power 9W/0,5 m Type of LED 3014 Light colors Warm white (3000K), cool white (6000K), neutral white (4000-4500K) Protection ingress IP IP20 Size (mm) 10 Energy class F Energy consumption in kWh/1000h 9 kWh/1000h Lighting stream 900 lm/0,5 m Lifetime 30 000h Quantity of on/off cycles ‰¥15000 Illumination time up to 60% of full light flux ‰¤1s Working with dimmers Yes CRI - rate of colour rendering ‰¥80 Place of product use For indoor use in a dry room LED strip length 5m