Victron Automotive IP65 Charger 12V/4A-12V/1A Retail BPC120480034R

Automotive IP65 Charger 12V/4A-12V/1A Retail   Automotive IP65 Battery Charger 12V/4A €“ 12V/0,8A with DC connector DC connector Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger. Less maintenance and aging when the battery is not in use: the Storage Mode The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to €˜equalize€™ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Protected against overheating and reverse polarity connection The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection. Five LED€™s for status and mode indication When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge profiles with the MODE button: Current limited t0 0,8A and 14,4V absorption voltage. The red LED  Current 4A and 14,4V absorption voltage. The red LED >14Ah will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature 10-35°C. Current 4A and 14,7V absorption voltage. The red LED COLD will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).  - Until the battery is fully charged, the red LED CHARGE will be on. - After completion of the charge process, the red LED FULL will be on. - In case of reverse polarity connection, the red LED ! will be on. - If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted. - The charger always starts in STANDBY mode when connected to the AC supply. Important Notice: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product. If you have any questions or concerns, please feel free to contact our customer support team for further assistance at  support@batsol.co.uk or phone us at 01752 656270. At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you. Thank you for choosing Batteries and Solar for your purchase. Key Features Versatile charging options with clamps, eyelets, and cigarette plug Storage mode to prevent aging and maintenance when the battery is not in use Overheating and reverse polarity protection Five LEDs for status and mode indication Three charge profiles with 0.8A/14.4V, 4A/14.4V, and 4A/14.7V options   Specifications Brand Victron Energy Manufacturer Part Number BPC120480034R