Victron SmartSolar MPPT 75/15 Retail SCC075015060R
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
MPPT: Ultra Fast Maximum Power Point Tracking
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations €“ even when there is no internet connection or phone signal nearby €“ you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Load output
The intelligent Load output function prevents damage caused by running batteries €˜flat€™. You can configure the voltage at which SmartSolar disconnects a load €“ thereby preventing excessive drain on your batteries. And here€™s the clever bit: SmartSolar will attempt a 100% recharge every day. If it can€™t €“ during periods of poor weather €“ it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a €˜partially charged€™ state and the €˜end of discharge€™ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Technical Specifications
Brand
Victron Energy
Manufacturer Part Number
SCC075015060R
GTIN
8719076040804
Battery Voltage
12/24 Auto Select
Rated Charge Current
15A
Nominal PV Power, 12V
220W
Nominal PV Power, 24V
440W
Max. PV Short Circuit Current
15A
Maximum PV Open Circuit Voltage
75V
Efficiency
98%
Charge Algorithm
Multi-stage adaptive
Data Communication Port
VE.Direct
IP Rating
IP43 (electronic components), IP22 (connection area)
Dimensions
H100 x W113 x D40mm
Weight
0.5Kg
Warranty
5 Years
Data Sheets
Data Sheet
Product Manual
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations €“ even when there is no internet connection or phone signal nearby €“ you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Load output
The intelligent Load output function prevents damage caused by running batteries €˜flat€™. You can configure the voltage at which SmartSolar disconnects a load €“ thereby preventing excessive drain on your batteries. And here€™s the clever bit: SmartSolar will attempt a 100% recharge every day. If it can€™t €“ during periods of poor weather €“ it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a €˜partially charged€™ state and the €˜end of discharge€™ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Technical Specifications
Brand
Victron Energy
Manufacturer Part Number
SCC075015060R
GTIN
8719076040804
Battery Voltage
12/24 Auto Select
Rated Charge Current
15A
Nominal PV Power, 12V
220W
Nominal PV Power, 24V
440W
Max. PV Short Circuit Current
15A
Maximum PV Open Circuit Voltage
75V
Efficiency
98%
Charge Algorithm
Multi-stage adaptive
Data Communication Port
VE.Direct
IP Rating
IP43 (electronic components), IP22 (connection area)
Dimensions
H100 x W113 x D40mm
Weight
0.5Kg
Warranty
5 Years
Data Sheets
Data Sheet
Product Manual
The intelligent Load output function prevents damage caused by running batteries €˜flat€™. You can configure the voltage at which SmartSolar disconnects a load €“ thereby preventing excessive drain on your batteries. And here€™s the clever bit: SmartSolar will attempt a 100% recharge every day. If it can€™t €“ during periods of poor weather €“ it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a €˜partially charged€™ state and the €˜end of discharge€™ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Technical Specifications
Data Sheets Data Sheet Product Manual
Brand | Victron Energy |
---|---|
Manufacturer Part Number | SCC075015060R |
GTIN | 8719076040804 |
Battery Voltage | 12/24 Auto Select |
Rated Charge Current | 15A |
Nominal PV Power, 12V | 220W |
Nominal PV Power, 24V | 440W |
Max. PV Short Circuit Current | 15A |
Maximum PV Open Circuit Voltage | 75V |
Efficiency | 98% |
Charge Algorithm | Multi-stage adaptive |
Data Communication Port | VE.Direct |
IP Rating | IP43 (electronic components), IP22 (connection area) |
Dimensions | H100 x W113 x D40mm |
Weight | 0.5Kg |
Warranty | 5 Years |
Data Sheets Data Sheet Product Manual
Amps Range: 10-19A |
Internal Reference:
103453