Parking Sensors ( 4 ) Matt Black DPS400MBLK

The Dolphin DPS400 is a 4 recess mounting sensor system manufactured to fit a wide range of cars and look like original fit equipment. This kit has 4 sensors with a buzzer. The buzzer gives audible bleeps with increasing frequency as you get closer to an obstacle. The unit is activated when reverse gear is selected. When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone, warning you that you should stop the car. The sensors are on cables just over 2m long and should cover the width of most vehicles but we do have extension leads if needed. You mount the brainbox in the rear of the car, traditionally in a side panel behind one of the rear light clusters, so the sensor cables do not have to run to the front of the car. You connect the brainbox up to the reversing light for its power supply. The buzzer is on a 2m cable length designed to be mounted in the boot area. Specifications  

• 4 Sensors In Your Colour Choice From A Range of 32 Colours
• Swap Socket Wiring For Ease Of Fitting & Replacement If Required
• Adjustable Sensitivity Control On The Brain Box
• 21mm Hole Cutter And English Instruction Manual Included
• Lifetime Warranty On The Sensors - Auto Express Award Winning

  Available in 32 Colours There are 32 coloured sensors in the range, the colours are baked on so will not crack as can happen with retro spraying. The sensors require a 21mm hole (cutter supplied in box) and have a 25mm outerface leaving a 2mm overlap.

  

  Adjustable Brainbox Our new adjustable brainbox means that you have full control over the detecting distance that your parking sensors have from your car. This is particularly useful for cars with low bumpers or bumpers that are angled at the ground. It is not normally necessary to play with this setting but gives some flexibility with fitting if needed.

  

  Swap Socket Feature The kit has a watertight swap socket feature based 6 inches from the sensor heads, it makes installation quicker and easier. Also should you ever have a problem with faulty sensors or accident damage in the future it facilitates easy replacement without having to rewire from scratch.